-
DEAD CENTER
ORDER NO. SIZE L A B C E d2 d1 d VLC-112 MT-2 100 69 67 31 8 17.78 18 6 VLC-113 MT-3 125 89 81 39 10 23.825 24.1 8 VLC-114 MT-4 155 109 102.5 46 14 31.267 31.6 10 VLC-115 MT-5 200 136 129.5 64 18 44.399 44.7 14 VLC-116 MT-6 270 190 182 80 30 63.648 63.8 18 Lathe Centers Carbide tipped-HRC 70
Hardened & precision ground.
Concentricity within .0002”(0.05mm)
-
Interchangeable Points Live Center
ORDER NO. TYPE A B C D D1 ACCURACY VCL-312 MT2 22 36 69 32 25 0.008 VCL-313 MT3 23 44 86 41 30 0.008 VCL-314 MT4 23 51 108 47 32 0.008 -
K-Type Milling-Vice VK-Series
It’s a practical piece of equipment with excellent precision and a high quality finished.
Body, movable jaw and swivel base made of close-grained high tensile iron castings. Built for heavy duty machining and retained accuracy.
Jaw plates were made of hardened and grounded tool steel.
It’s the most suitable for the Milling, Grinding and Drilling.
-
Precision Gauge Blocks
Gauge blocks are fundamental standards for linear measurement. For adjusting, checking. or inspecting measuring instruments and tools, and precision workpieces.
Gauge blocks are used either individually or in combination of several blocks which are wrung together.
Steel gauge blocks are made of quality alloy steel. and carbide, the ceramics are also available.
The hardness number of the measuring surfaces is no less than HRC64.
The blocks have fine wear resistance, They are heat treated in special ways so as to stabilize their lengths.STEEL METRIC GAUGE BLOCKS
ORDER NO. Total blocks Nominal dimension Steps No.of blocks Grade VGB-112-0 112 1.0005
1.001-1.009
1.01-1.49
0.5-24.5
25-100–
0.001
0.01
0.5
251
9
49
49
40
1
2VGB-112-1 VGB-112-2 VGB-103-0 103 1.005
1.01-1.49
0.5-24.5
25-100–
0.01
0.5
251
49
49
40
1
2VGB-103-1 VGB-103-2 VGB-87-0 87 1.001-1.009
1.01-1.49
0.5-9.5
10-1000.001
0.01
0.5
109
49
19
100
1
2VGB-87-1 VGB-87-2 VGB-47-0 47 1.005
1.01-1.09
1.1-1.9
1-24
25-100–
0.01
0.1
1
251
9
9
24
40
1
2VGB-47-1 VGB-47-2 VGB-38-0 38 1.005
1.01-1.09
1.1-1.9
1-9
10-100–
0.01
0.1
1
101
9
9
9
100
1
2VGB-38-1 VGB-38-2 -
Revolving Center Standard
Part No.
Taper Shank
Ød mm
ØD mm
ØD1 mm
L1 mm
L2 mm
L mm
RC MT1 STD
MT-1
18.0
46.5
12.065
26.0
51.0
53.5
RC MT2 STD
MT-2
23.0
50.0
17.78
31.0
61.0
64.0
RC MT3 STD
MT-3
30.0
62.0
23.825
38.0
70.5
81.0
RC MT4 STD
MT-4
30.0
62.0
31.267
38.0
73.5
102.5
RC MT5 STD
MT-5
34.0
68.0
44.399
42.0
78.0
129.5
RC MT6 STD
MT-6
50.0
105.0
63.348
58.0
91.0
182.5
-
Universal Boring and Facing Head Narex
Vhu – as a boring device – considerably increases possibilities of boring, drilling and milling machines. These heads are suitable for precision boring of cylindrical holes and for machining of external cylindrical surfaces. The boring head Vhu by means of an automatic slide feed makes possible facing, backfacing and taper machining. The slide feed is adjustable in three or four grades and is stopped on adjustable dog by the pin clutch. The feed is derived from the rotary motion of the head, if one of the feed is derived from the rotary motion of the head, if one of the feed is adjusted, the pin of the clutch is put in and the brake ring is held by means of the stop bar.
