-
Stainless Steel Shim Trinity Brand Industries
302 Full Hard Stainless Steels Shim Rolls
These Shims are used in a wide variety of applications including food and beverage equipment, sanitary, cryogenic, and medical. They represent an excellent combination of corrosion resistance and ease of fabrication because of some of the important properties, i.e. high strength with low weight, resistance to oxidation, ease of cleaning, beauty of appearance, prevention of product contamination, good strength and toughness at cryogenic temperatures
AVAILABLE SIZE :-
THICKNESS INCH THICKNESS MM W X L W X L 0.001 in 0.025mm 6 x 50 in 12 x 50 in 0.0015 in 0.0381mm 6 x 50 in 12 x 50 in 0.002 in 0.051mm 6 x 50 in 12 x 50 in 0.003 in 0.076mm 6 x 50 in 12 x 50 in 0.004 in 0.10mm 6 x 50 in 12 x 50 in 0.005 in 0.12mm 6 x 50 in 12 x 50 in 0.006 in 0.152mm 6 x 50 in 12 x 50 in 0.007 in 0.178mm 6 x 50 in 12 x 50 in 0.008 in 0.203mm 6 x 50 in 12 x 50 in 0.009 in 0.230mm 6 x 50 in 12 x 50 in 0.010 in 0.25mm 6 x 50 in 12 x 50 in 0.012 in 0.305mm 6 x 50 in 12 x 50 in 0.015 in 0.381mm 6 x 50 in 12 x 50 in 0.020 in 0.020mm 6 x 50 in 12 x 50 in 0.025 in 0.025mm 6 x 50 in 12 x 50 in 0.031 in 0.787mm 6 x 50 in 12 x 50 in -
Music Wire Steel And Stainless Steel
Steel and stainless steel
Range:-
014″ to 080″ / 0.36mm to 2.0mm -
Torque Wrenches
All-steel construction,superb durability.
The 45-tooth reversible ratchet head results in both clockwise and counter clockwise.
+/-4% accuracy in clockwise direction exceeds international specifications.
Unique, stay-in-place,Lock Ring makes adjustments easier and secures selected torque from accidental change.
Dual Metric and English scales are easy to read and set.
The identity code marked on each wrench makes it possible to trace.
Non slip handle with groove design.Metric Unit
Part Code
Drive Torque Range Length Width Weight N.m Lb.ft mm mm kg GM112 1/4″ 2.5-12 20-105* 290 38 0.68 GM120 1/4″ 4.0-20 30-180* 290 38 0.68 GM230 3/8″ 6.0-30 50-250* 318 38 0.82 GM330 1/2″ 6.0-30 50-250* 318 38 0.82 GM260 3/8″ 10-60 9-45 388 38 0.96 GM360 1/2″ 10-60 9-45 388 38 0.96 GM2100 3/8″ 20-100 15-75 443 38 1.04 GM3100 1/2″ 20-100 15-75 443 38 1.04 GM2125 3/8″ 25-125 20-90 443 38 1.04 GM3125 1/2″ 25-125 20-90 443 38 1.04 GM3200 1/2″ 40-200 30-150 468 40 1.16 GM3335 1/2″ 65-335 50-250 528 40 1.30 GM4335 3/4″ 65-335 50-250 528 40 1.34 GM3335L 1/2″ 65-335 50-250 700 40 2.10 GM4335L 3/4″ 65-335 50-250 700 40 2.15 GM4400 3/4″ 80-400 60-300 700 57 2.95 GM4500S 3/4″ 100-500 80-400 700 57 2.95 GM4500 3/4″ 100-500 80-400 855 60 5.00 GM4800 3/4″ 160-800 120-600 1055 60 5.90 GM5800 1″ 160-800 120-600 1055 60 5.90 GM41000 3/4″ 200-1000 150-750 1055 60 5.90 GM51000 1″ 200-1000 150-750 1055 60 5.90 GM51500 1″ 300-1500 200-1100 1260 72 9.20 GM52000 1″ 400-2000 300-1500 1260 72 9.20 GM53000 1″ 600-3000 400-2000 1260 72 10.50 -
Letter Steel Stamp
27 PCS / SET (A to Z, plus Ampersand “&”)
Each set packed in a red plastic case.
Stamp is the sandblasting treatment.
Hardness: Front End Font HRC 58-62 Degrees. Tail End Tempering HRC 38-46 Degrees
For hand-held, hammer-struck and/or machine applications.
Each stamp is marked with the mm/ inch sizes on the stamp’s body side.
Each stamp is cut-head sided.
Material:CRV(6150)Available sizes 2 mm to 12 mm
-
Number Steel Stamps
9 PCS / SET (0~8 (the 6 is used as 9)
Each set packed in a red plastic case.
Stamp is the sandblasting treatment.
Hardness: Front End Font HRC 58-62 Degrees.
Tail End Tempering HRC 38-46 Degrees
For hand-held, hammer-struck and/or machine applications.
Each stamp is marked with the mm/ inch sizes on the stamp’s body side.
Each stamp is cut-head sided.
Material:CRV(6150)
Available sizes 2 mm to 12 mm -
DOTTED STEEL STAMPS
Round Dot Steel Stamps
Each set packed in a PP red strong plastic case
HRC 58~62 Degrees.
Stamp is the sandblasting treatment.
Each stamp is marked with the mm/ inch sizes on the stamp’s body side.
Each stamp is double-beveled face for easy sighting.
Number steel stamp Set，9 PCS/SET Include 0~8 (the 6 is used as 9)
Alphabet steel stamp Set，27PCS/SET A~Z plus &.
Available sizes 2 mm to 12 mm -
Combined Number and Letter Punch With Hammer
Kit includes: Type Holder-one pc, hexagon wrench- one pc;Steel types*100pcs(52 individual pcs of type letters A thru Z (two each A~Z); 36 individual pcs of numbers 0 thru 8(four each 0~8, the 6 is used as 9); one “&”, two slash”/”;two dash”-“; and six blank spaces)
Each set packed in a ABS red strong plastic case.
HRC 58~60 Degrees.
The holder can accommodate 9 pieces of steel types.Available sizes 3 mm 5 mm 6 mm
-
Interchangeable Points Live Center
ORDER NO. TYPE A B C D D1 ACCURACY VCL-312 MT2 22 36 69 32 25 0.008 VCL-313 MT3 23 44 86 41 30 0.008 VCL-314 MT4 23 51 108 47 32 0.008 -
Revolving Center Standard
Part No.
Taper Shank
Ød mm
ØD mm
ØD1 mm
L1 mm
L2 mm
L mm
RC MT1 STD
MT-1
18.0
46.5
12.065
26.0
51.0
53.5
RC MT2 STD
MT-2
23.0
50.0
17.78
31.0
61.0
64.0
RC MT3 STD
MT-3
30.0
62.0
23.825
38.0
70.5
81.0
RC MT4 STD
MT-4
30.0
62.0
31.267
38.0
73.5
102.5
RC MT5 STD
MT-5
34.0
68.0
44.399
42.0
78.0
129.5
RC MT6 STD
MT-6
50.0
105.0
63.348
58.0
91.0
182.5
-
DEAD CENTER
ORDER NO. SIZE L A B C E d2 d1 d VLC-112 MT-2 100 69 67 31 8 17.78 18 6 VLC-113 MT-3 125 89 81 39 10 23.825 24.1 8 VLC-114 MT-4 155 109 102.5 46 14 31.267 31.6 10 VLC-115 MT-5 200 136 129.5 64 18 44.399 44.7 14 VLC-116 MT-6 270 190 182 80 30 63.648 63.8 18 Lathe Centers Carbide tipped-HRC 70
Hardened & precision ground.
Concentricity within .0002”(0.05mm)
-
K-Type Milling-Vice VK-Series
It’s a practical piece of equipment with excellent precision and a high quality finished.
Body, movable jaw and swivel base made of close-grained high tensile iron castings. Built for heavy duty machining and retained accuracy.
Jaw plates were made of hardened and grounded tool steel.
It’s the most suitable for the Milling, Grinding and Drilling.
-
Universal Boring and Facing Head Narex
Vhu – as a boring device – considerably increases possibilities of boring, drilling and milling machines. These heads are suitable for precision boring of cylindrical holes and for machining of external cylindrical surfaces. The boring head Vhu by means of an automatic slide feed makes possible facing, backfacing and taper machining. The slide feed is adjustable in three or four grades and is stopped on adjustable dog by the pin clutch. The feed is derived from the rotary motion of the head, if one of the feed is derived from the rotary motion of the head, if one of the feed is adjusted, the pin of the clutch is put in and the brake ring is held by means of the stop bar.
-
Precision Gauge Blocks
Gauge blocks are fundamental standards for linear measurement. For adjusting, checking. or inspecting measuring instruments and tools, and precision workpieces.
Gauge blocks are used either individually or in combination of several blocks which are wrung together.
Steel gauge blocks are made of quality alloy steel. and carbide, the ceramics are also available.
The hardness number of the measuring surfaces is no less than HRC64.
The blocks have fine wear resistance, They are heat treated in special ways so as to stabilize their lengths.STEEL METRIC GAUGE BLOCKS
ORDER NO. Total blocks Nominal dimension Steps No.of blocks Grade VGB-112-0 112 1.0005
1.001-1.009
1.01-1.49
0.5-24.5
25-100–
0.001
0.01
0.5
251
9
49
49
40
1
2VGB-112-1 VGB-112-2 VGB-103-0 103 1.005
1.01-1.49
0.5-24.5
25-100–
0.01
0.5
251
49
49
40
1
2VGB-103-1 VGB-103-2 VGB-87-0 87 1.001-1.009
1.01-1.49
0.5-9.5
10-1000.001
0.01
0.5
109
49
19
100
1
2VGB-87-1 VGB-87-2 VGB-47-0 47 1.005
1.01-1.09
1.1-1.9
1-24
25-100–
0.01
0.1
1
251
9
9
24
40
1
2VGB-47-1 VGB-47-2 VGB-38-0 38 1.005
1.01-1.09
1.1-1.9
1-9
10-100–
0.01
0.1
1
101
9
9
9
100
1
2VGB-38-1 VGB-38-2 -
Magnets
POT MAGNETS
Has unlimited applications such as magnetic fasteners, displays, holding maps etc.
tapped hole of thread M6
Comes with plated keepersMAGNETIC HOLDFASTS
Provided with push off screw to push work away from the holdfasts as these cannot be done by hand
Also provided with plated keepers which protect and retain magnetic field
Can be used to hold work for welding, grinding and are ideal for making inexpensive lifting devices and jigs
Have many applications in material handling and machine shopSHALLOW CERAMIC MAGNETS
Permanent, powerful magnets to hold, lift and attract metal parts
Shallow depth permits use in confined spaces
ASM-0656 has 10 x 24 threaded center hole for fastening with machine screw
Large sizes have 3/8” clearance holes for fastening with rods or bolts -
Double Ended Boring Bar With Holders
Made from tool steel
Double ended boring bars and holder comes complete with screws and allen keys
Black shining finish
Supplied with or without tool bits
Boring bars have one end 45° and other 90°
SIZE RANGE: 3/8″ TO 1-3/16
-
Precision Steel Square
Made of finest quality ground steel with heavy thick stock
Blade is hardened and ground for straightness and parallelism
Squares are accurate both inside and outside
Sizes 18” (450 mm) and above are supplied in wooden box
Effective blade length measured from inner edge of the beam to end of the blade
Available in flat style and with back -
Knurling Tool Holders And Knurling Wheels
Machined ground steel in shiny black finish
Knurls are hob cut from high speed steel and heat treated
Six knurl tool is provided with one pair each of fine medium and coarse knurls
Two knurl tool is provided with medium knurls -
Wheel Dresser
Sturdy construction
Made of cast iron
Must for every industry
No. 0 for wheels upto 10” (250 mm) Dia. x 2” (50 mm)No. 1 for wheels upto 15” (380 mm) Dia. x 3” (75 mm)
No. 2 for higher sizes wheels.
Spare Cutter Available.
-
Round Die Stock Handles
For holding adjustable round split dies
Three set screw pattern
Black finish
Single piece construction
OUTSIDE DIA OF DIE (INCH) APPROX LENGTH (MM) 5/8” 5-1/2” / 140 MM 13/16” 6-1/2” / 170 MM 1” 8-1/2” / 220 MM 1-5/16” 10” / 250 MM 1-1/2” 12” / 300 MM 2” 15” / 380 MM 2-1/2” 19” / 480 MM 3” 22” / 560 MM 3-1/2” 24” / 610 MM 4” 29” / 735 MM 5” 33” / 835 MM -
Adjustable Taps and Reamer Wrench
High quality tool for hand tapping operations
Hardened and tempered jaws
SQUARE SIZE (MM) APPROX TOTAL LENGTH (MM) APPROX TOTAL LENGTH (MM) 1/16 – 1/4 2 – 6 180 1/16 – 3/8 2.5 – 8 235 5/32 – 1/2 4 – 9 280 1/4 – 3/4 4.9 – 12 375 1/4 – 1-1/8 5.5 – 16 500 3/4 -1-1/2 9 – 25 1000 1-2-1/2 16 – 32 1370 -
Inside And Outside Calipers And Dividers
Professional grade dividers and calipers with rugged construction
Legs made from heavy square stock machined to smooth taper
Hardened and ground measuring points
Quick spring nut for making quick positive adjustments
Brass Vernier Caliper
Wing divider
