-
Magnets
POT MAGNETS
Has unlimited applications such as magnetic fasteners, displays, holding maps etc.
tapped hole of thread M6
Comes with plated keepersMAGNETIC HOLDFASTS
Provided with push off screw to push work away from the holdfasts as these cannot be done by hand
Also provided with plated keepers which protect and retain magnetic field
Can be used to hold work for welding, grinding and are ideal for making inexpensive lifting devices and jigs
Have many applications in material handling and machine shopSHALLOW CERAMIC MAGNETS
Permanent, powerful magnets to hold, lift and attract metal parts
Shallow depth permits use in confined spaces
ASM-0656 has 10 x 24 threaded center hole for fastening with machine screw
Large sizes have 3/8” clearance holes for fastening with rods or bolts -
Double Ended Boring Bar With Holders
Made from tool steel
Double ended boring bars and holder comes complete with screws and allen keys
Black shining finish
Supplied with or without tool bits
Boring bars have one end 45° and other 90°
SIZE RANGE: 3/8″ TO 1-3/16
-
Precision Steel Square
Made of finest quality ground steel with heavy thick stock
Blade is hardened and ground for straightness and parallelism
Squares are accurate both inside and outside
Sizes 18” (450 mm) and above are supplied in wooden box
Effective blade length measured from inner edge of the beam to end of the blade
Available in flat style and with back -
Knurling Tool Holders And Knurling Wheels
Machined ground steel in shiny black finish
Knurls are hob cut from high speed steel and heat treated
Six knurl tool is provided with one pair each of fine medium and coarse knurls
Two knurl tool is provided with medium knurls -
Wheel Dresser
Sturdy construction
Made of cast iron
Must for every industry
No. 0 for wheels upto 10” (250 mm) Dia. x 2” (50 mm)No. 1 for wheels upto 15” (380 mm) Dia. x 3” (75 mm)
No. 2 for higher sizes wheels.
Spare Cutter Available.
-
Round Die Stock Handles
For holding adjustable round split dies
Three set screw pattern
Black finish
Single piece construction
OUTSIDE DIA OF DIE (INCH) APPROX LENGTH (MM) 5/8” 5-1/2” / 140 MM 13/16” 6-1/2” / 170 MM 1” 8-1/2” / 220 MM 1-5/16” 10” / 250 MM 1-1/2” 12” / 300 MM 2” 15” / 380 MM 2-1/2” 19” / 480 MM 3” 22” / 560 MM 3-1/2” 24” / 610 MM 4” 29” / 735 MM 5” 33” / 835 MM -
Adjustable Taps and Reamer Wrench
High quality tool for hand tapping operations
Hardened and tempered jaws
SQUARE SIZE (MM) APPROX TOTAL LENGTH (MM) APPROX TOTAL LENGTH (MM) 1/16 – 1/4 2 – 6 180 1/16 – 3/8 2.5 – 8 235 5/32 – 1/2 4 – 9 280 1/4 – 3/4 4.9 – 12 375 1/4 – 1-1/8 5.5 – 16 500 3/4 -1-1/2 9 – 25 1000 1-2-1/2 16 – 32 1370 -
Inside And Outside Calipers And Dividers
Professional grade dividers and calipers with rugged construction
Legs made from heavy square stock machined to smooth taper
Hardened and ground measuring points
Quick spring nut for making quick positive adjustments
Brass Vernier Caliper
Wing divider
-
DRILL SHARPENER STHOR 73473
Multifunctional sharpener 150 W for sharpening steel drill bits 3 mm -13 mm, knives, axes and choppers scissors.
TECHNICAL DATA:
Mains voltage – 230 VRated power – 150 W
Nominal revolutions – 5500 min-1
Diameter of the drill – 3 mm -13 mm
The tip angle of the drill – 118 degrees
Degree of protection – IP20
Weight – 1.62 kg
Application
– sharpening of drills for drilling in metal or universal drills– sharpening of knives
– sharpening of scissors
– sharpening of axes and cleavers provided that all of the above the products are made of steel.
-
Ambersil Tufcut Metal Cutting Liquid
A ready to use concentrated metal cutting lubricant for machining metals and some composite materials. An advanced formulation means that this liquid provides exceptional heat dispersing and lubricating properties allowing an improved finish to the machined surface.
Directions of use:
Apply direct to the workpiece
Suitable for a range of metals including stainless and high carbon steels
Eliminates chip weld
Prolongs tool life -
12 PIECE 140MM NEEDLE FILE SET DRAPER TOOLS
2 x flat hand, 2 x flat taper, taper round,half round, square, triangular, oval, crossing, crochet and knife
-
DEBURRING TOOL
DT-2 TOOL
Simple, Economical Deburring tool.
Al. 3/8″ A/F Hex body, Powder coated handle with C-10 blade.
Blade can be replaced.DT-3 TOOL
Economical Handle with Polyacetal blade holder & 3 blades of 3.2 mm Ø
Blades can be replaced & stored.
Includes : ‘D’ Handle & 3 Blades – C-10, C-20 & C-30C10 BLADE
.2 mm Ø blade for heavy duty application for material forming contineous chips such as Steel, Al., Copper, Zinc, Plastics, etc.
Blade Material : HSS -
Thread Restoring Files
Nu-Thread® files are the highest quality with cross-cut and depth proportional to the thread pitch, so file will not skip or jump out of fine pitches. Also Nu-Thread® files are milled rather than cold-formed on a stamping machine, so the teeth are sharp and do the work rather than the mechanic’s muscles. These files have been made by us to this high standard since 1947 in Reading, Pennsylvania, and will renew damaged external threads of any diameter (right or left-hand).
Size :-
11-24 tpi
9-32 tpi.
8-32 tpi
0.75,1,1.25,1.5,1.75,2mm Pitch -
FREEMANS PRO-DL30 Digital Spirit Level 30 Cm
LCD Measurement Accuracy +/- 1 degree
Vial Measurement Accuracy Bottom Surface 0.5mm/m.
Vial Measurement Accuracy Top Surface 0.75mm/m.
Accurate Measurements from both surfaces (top and bottom).
Machined Measurement Surfaces for better accuracy.
Extra strong magnetic base.
Shock proof end caps. -
DIAMOND FILES
Diamond Large Files are suitable for glass, tile, ceramic, stone, marble, metal, stainless steel and many others.
• Diamond Grit• Good quality
• Total Length 6″, 8″, 10″, 12″
-
Multifunction Tool Sharpener
This multi-task sharpener tool includes three working modules:
HSS drill sharpener – Sharpens all high speed steel drill bits from 3 mm to 13 mm.
Knife & Scissor Sharpener – Sharpens all straight edged knives & scissors.
Chisel & plane sharpener – Regrinds chisel & plane blades from 6 mm to 51 mm wide.
Versatile and easy to useVoltage: 220 V
Power: 96 W -
Portable Drill Bit Sharpener
With Pink Corundum Grinding Wheel for 2-12.5mm Straight Shank Twist Drill
-
Damaged Screw Remover and Extractor Set
Material: HSS
Size of Damaged Screw Remover:
Screw Extractor #0 Diameter 2 ~3mm
Screw Extractor #1 Diameter 3 ~ 5mm
Screw Extractor #2 Diameter 4 ~ 8mm
Screw Extractor #3 Diameter 5 ~ 10mm
Screw Extractor #4 Diameter 6 ~ 12mmEasy to Use:
Select a drill bit slightly smaller than the screw
Drill a hole in the center of the screw with drill bit
Extract screw with the extractor -
Fold-able Multi Angle Ruler
This protractor is made of high-quality aluminum alloy, which is superior and stronger than traditional plastic protractors
The angle measuring tool comes with an adjustable nut for allowing to choose a fixed angle, and the slid-able design will help to easily switch or remove the angle. This tool precisely measures the angle, then locks the angle and divides the angle . -
Plastic Contour Profile Gauge
Size: 10 inch/25 cm multi-functional contour profile gauge, available both in inch and metric scale measurements. Size mark on both sides, and both sides are available.
Useful tools to operate all kinds of modelling.The movement of the pins is really flexible, making measuring and cutting easier -
Tap Extractor For Damage And Broken Ttaps
No. Size #1 M4 #2 M5 #3 M6 #4 M7-8 #5 M9-10 #6 M11-12 #7 M14 #8 M16 #9 M18-20 #10 M22-24 -
BENCH VICE UNBREAKABLE STEEL BODY N-161
Unbreakable steel body which is CNC machined on all load-bearing surfaces for smooth and trouble-free operation.
Jaws of vice made of special carbon steel hardened and serrated to ensure a rigid grip and nonslip.
Fine acme thread screw.
The unbreakable steel cast iron dovetailed nut can be replaced when worn.
Hi-tensile fasteners used for strength and rigidity of vice. -
DRILL MACHINE VICE DELUXE MODEL : N-163
Manufactured from unbreakable alloy steel, these drill vices have been designed for accuracy, making them
ideal for engineering workshops and tool rooms.
Jaw depth extra than regular drill press vices.
Fine acme thread lead screw.
The base and slides are precision ground for stability and accurate operation.
Horizontal & vertical V-grooves in the stationary jaw allows holding of rounding job securely.
The base is slotted enabling the vice to be bolted to drill press tables, assisting in quick & accurate positioning. -
TILTING & SWIVELING MACHINE VICE : N-153
Angular Machine Vices are ideal for applications where in the workpiece requires machining at an angle.
Angular adjustment is achieved via the angular slide that can be set to any desired angle
Additionally the fully graduated 3600 swivel base allows the vice to be set at any angle along the vertical axis
These vices are manufactured from close grained hi-tensile seasoned cast iron.
Unbreakable steel crank handle.
Use of hi tensile grade fasteners provides strength and rigidity to these vices.
hardened and ground jaw.
A milled slot in the vice base helps in accurate location of the vice on the machine table using rectangular locating nuts.
Accuracy in parallelism of jaws 0.02/100mm.
“Hold Down” slots allow for secure clamping of the vice on the machine table -
3 WAY TILTING & SWIVELING MACHINE VICE : N-154
3 way Tilting vices provide for 3 axis setting of the workpiece in special milling, drilling, grinding, Shaping and jig boring applications.
Vices have 2 angular slides which allow the workpiece to be set at any desired angle – 45° tilting range on either side and 90° vertical indexing. The 360° swivel base further allows rotation along the vertical axis.
These vices are manufactured from close-grained hi-tensile seasoned cast iron.
Unbreakable steel crank handle.
Use of hi-tensile grade fasteners provides strength and rigidity to these vices.
hardened and ground jaws.
A milled slot in the vice base helps in the accurate location of the vice on the machine table using rectangular locating nuts.
Accuracy in parallelism of jaws 0.02/100mm.
“Hold Down” slots allow for secure clamping of the vice on the machine table. -
DRILL MACHINE VICE : N-162
Manufactured from unbreakable alloy steel, these drill vices have been designed for accuracy, making them ideal for engineering workshops and tool rooms.
Fine acme thread lead screw.
The base and slides are precision ground for stability and accurate operation.
Horizontal & vertical V-grooves in the stationary jaw allows holding of rounding job securely.
The base is slotted enabling the vice to be bolted to drill press tables, assisting in quick & accurate positioning. -
PRECISION TOOLMAKERS VICE
These vices are mainly used with precision grinding, milling machines, engraving, and jig boring operations.
Ground & square all over the vice may be mounted on its base, sides or end.
The moving jaw has two vees ground into its face, one vertical the other horizontal to aid gripping round components.
Clamping and releasing through a precision cut square thread lead screw for smooth operation.
Vice screw moves in specially designed gun metal bush which reduce wear the vice and enhancing life of vice. -
Precision Milling Machine Vice N-151
Sturdy and accurately made machine vices from graded casting
Fine acme thread screw
Jaws are made of special steel properly hardened
The swivel base is graduated fully through 360°
Vice can be converted from swivel base to fix by removing the base
Quick alignment to machines through longitudinal slot provided in base and body
Crank handle is made of all steel providing loaded mechanism providing positive grip.
-
Magnetic Drill Machine
MD40
MOTOR WATTS 1010 TOTAL POWER WATTS 1060 SPEED NO LOAD RPM 720 SPEED FULL LOAD 450 ARBOR/DRIVE WELDON 19 mm CUTTER CAPACITY 12-40 mm CUTTER DEPTH OF 110 mm DRILLING CAPACITY 3-16 mm COUNTERSINK CAPACITY 10-30 mm SLIDE STROKE 170 mm MAGNETIC ADESION 1100 kg MAGNETIC FOOT 85×170 mm MAGNET FIXED OVERALL HEIGHT 320 mm OVERALL WIDTH 120 mm OVERALL LENGTH 280 mm ARBOR FOR CUTTERS 19 mm COOLANT SYSTEM THROUGH ARBOR WEIGHT 11.5 kg
