-
WIZARD WRAPS Pipe Wrap-A-Round
Pipe Wrap-A-Round
Flange Wizard Wraps are made from a non-asbestos, heat resistant material, Wizard Wrap is a high density product for heavy duty service at temperature up to 360° F
A tape measure is printed on all Wizard Wrap. This limits the need for an extra tape measure and makes mark-up easier. A “Circumference & Quartering” scale printed on every small, medium and large Wizard Wrap. This limits the need for calculations because the exact circumference, 1/4, 1/2, and 3/4 of the circumference, plus the actual pipe diameter for 2″ through 30″ pipe is printed on the outside of the Wizard Wrap. Packaged in a durable, reusable container that will hold up in your toolbox. Wizard Wraps have a nice thick edge for easier more accurate marking and to help your soapstone from slipping. They are resistant to oil, gasoline, kerosene, water, and seawater.
-
Contour Marker
The Curv-O-Mark Contour Marker is a compact, time-saving tool used to lay out pipe and structural steel joints.
The Contour Marker can be used to lay out pipe from 1-1/2 to 18 in. diameter, or structural steel members up to 18 in. The Contour Marker consists of an X-shaped frame, calibrated protractor, and a triple jointed marking arm and holder. The holder accepts a soapstone crayon (included), felt pen or pencil. The frame easily folds into a compact toolkit. It can be used right side up or upside down, depending on the direction of the line to be scribed The protractor is calibrated on both sides-one in degrees, the other in rise inches-per-foot-to service any type of measurement need. The unit comes with a Structural Adaptor designed to simplify the layout of structural joints, including l-beams, angles, channels, square tubing and similar shapes
-
Wrap A-Round
A tool for marking straight lines around pipe, or for use as a straight edge. Made out of flexible gasket material, with good resistance to heat and cold.
WRAP SIZE:
164B Medium: 100 x 1220mm (3.88in x 4ft)
176B Large: 100 x 1830mm (3.88in x 6ft)
177B XL: 125 x 2130mm (5in x 7ft)
179B XXL: 125 x 2740mm (5in x 9ft)SUITS PIPE SIZE:
164B Medium: 75-150mm (3-6 in) double-wrap, or up to 320mm (13 in) single wrap
176B Large: 75-250mm (3-10 in) double-wrap, or up to 480mm (19 in) single wrap
177B XL: 100-300mm (4-12 in) double-wrap, or up to 560mm (22 in) single wrap
179B XXL: 150-405mm (6-16 in) double-wrap, or up to 720mm (28 in) single wrap -
Radius Marker
Models are available in four sizes for scribing circles up to 80″ diameter. All are a folding type . All have sturdy friction joints to maintain rigidity and accuracy, and are made from lightweight, rustproof aluminum for long wear. A soapstone crayon is already installed in each radius marker.
-
RSK PRECISION LEVEL
The levels have ±0.2 scale all range accuracy in the main bubble
It has an insulating material which prevents heat transferring.
Levels have a bubble chamber in which the length of the bubble is manually adjustable.
MADE IN JAPAN
-
Outside Micrometer
Series 103
FEATURES
• Hammertone, baked-enamel-finished frame.
• Ratchet Stop for exact repetitive readings.
• With a standard bar except for 0-25mm modelTechnical Data
Graduation: 0.01mm, 0.001mm
Flatness: 0.6 μm for models up to 300mm/12″
1μm for models over 300mm/12″
Parallelism: (2+R/100)μm, R=max, range (mm)
Measuring faces: Carbide tipped -
Depth Micrometer SERIES 128
FEATURES
• ø4mm measuring rod.
• With measuring rod clamp.
• Carbide-tipped measuring rod model isavailable.
• With ratchet stop for constant force.Technical Data
Accuracy: ±3μm for micrometer head feed Graduation: .001” or 0.01mm
Flatness of reference face: 1.3μm for 63.5mm width base, 2μm for 101.6mm width base
Flatness of measuring rod face: 0.3μm
Parallelism between reference face and measuring rod face:
(4+L/50)μm, L=Max. measuring length (mm)
Measuring rod diameter: 4mm -
Tubular Inside Micrometers
FEATURES
• Wide range of ID measurements by combining extension rods (pipes) and
anvils with the micrometer head.
• Carbide-tipped measuring faces are available.
• Supplied in fitted plastic case except 1500 mm / 60” come in wooden case. -
Combination Square Set
FEATURES
• Measuring head are attached to the graduated steel rule (blade), allowing versatile measurements on various types of workpieces
• The measuring head come hardened or cast iron-not-hardened
• Economy sets not including a protractor head are also available -
Circumference Measuring Tape, stainless steel
For measuring the circumference and diameter at the same time with 10ths of mm .
16 mm wide steel tape with etched mm graduation and reader with vernier.
Reading of circumference on the lower edge of tape, on the upper reading of the corresponding diameter.Typ 161R-1
Circumference: 60 – 950mm, Diameter: 20 – 300mmTyp 161R-2
Circumference: 60 – 2200mm, Diameter: 20 – 700mmTyp 161R-3
Circumference: 60 – 3780mm, Diameter: 20 – 1200mmTyp 161R-4
Circumference: 60 – 4720mm, Diameter: 20 – 1500mmTyp 161R-5
Circumference: 60 – 5980mm, Diameter: 20 – 1900mmTyp 161R-6
Circumference: 60 – 7540mm, Diameter: 20 – 2400mmTyp 161R-7
Circumference: 60 – 8500mm, Diameter: 20 – 2700mmTyp 161R-8
Circumference: 60 – 9760mm, Diameter: 20 – 3100mmTyp 161R-9
Circumference: 60 – 11310mm, Diameter: 20 – 3600mm -
Feeler Gauge Bent Type
Metric feeler gauge 16 blades Stainless Steel
0.05mm to 1.00mm
Blade thickness : 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40,0.50, 0.55, 0.60, 0.70, 0.75, 0.80, 0.90, 1.00mm.
-
Plastigauge PL-E
For measurements of:0.030″ to 0.070″ (0.75mm – 1.75mm)
Contents: Each box contains 25 gauges (5 packs of 5 gauges, each gauge is 100mm or about 4 inches in length). Each pack contains measurement gauge (standard and metric) and instructions.
-
Plastigauge PL-D
For measurements of:0.020″ to 0.040″ (0.500mm – 1.00mm)
Contents: Each box contains 30 gauges (6 packs of 5 gauges, each gauge is 100mm or about 4 inches in length). Each pack contains measurement gauge (standard and metric) and instructions
-
Plastigauge PL-C
For measurements of:0.007″ to 0.020″ (0.175mm – 0.500mm)
Contents: Each box contains 100 gauges (10 packs of 10 gauges, each gauge is 100mm or about 4 inches in length). Each pack contains measurement gauge (standard and metric) and instructions.
-
Plastigauge PL-B
Plastigauge PL-B
For measurements of 0.004″ – 0.010″ (0.100mm-0.250mm)
Contents: Each box contains 100 gauges (10 packs of 10 gauges, each gauge is 100mm or about 4 inches in length). Each pack contains measurement gauge (standard and metric) and instructions
-
Plastigauge PL-A
Plasticgauge PL-A
For measurements of 0.001″ – 0.007″ (0.025mm-0.175mm)Contents: Each box contains 100 gauges (10 packs of 10 gauges, each gauge is 100mm or about 4 inches in length). Each pack contains measurement gauge (standard and metric) and instructions.
-
SEALED POWER – Plastic Gauge
Plastic Gauge
Green SPG – .001 – .003 / 0.025MM – 0.075MM
Red SPR – .002 – .006 / 0.05MM – 0.15MM
Blue SPB – .004 – .009 / 0.1MM – 0.23MM
Yellow SPY – .009″-.020″ / .23mm – .50mm
-
HSS and HSSCo Taper Shank drill bits
Morse Taper Shank High Speed Steel drill bits for steel cutting
Ideal for general machining applications in almost all material types
Cobalt drill bits for Stainless steel CuttingDesigned for drilling higher tensile, tougher materials where greater heat is generated during machining
-
HSS DRILL BIT SET
High Speed Steel Drill Bits Set
Ideal for general machining applications in almost all material types
AVAILABLE SIZES:
1/16″ TO 1/2″Inch 29 PCS
1MM – TO 13MM 25 PCS SET
-
Titanium Coated Twist Drill Bits Set
HSS drill bits coated in Titanium to resist heat and friction for a quality finish and a longer lasting drill bit.
AVAILABLE SIZES:
1MM – TO 13MM 25 PCS SET -
Step Drill Bit Set Hss Cobalt 5pcs
HSS and Titanium Coating
Made of strong and durable high speed steel coated with titanium , high speed steel make it last longer than others, titanium coating ensure easily cut thin through steel sheets, aluminum sheets, copper & plastic & wood board and many other types of sheet metal with ease, and it can automatically deburr holes while drilling to keep the drill bit clean.
Sizes:
# 1: 3/16 “to 1/2″ 6 Steps (3/16 ”, 1/4 ”, 5/16 “, 3/8 ”, 7/16 ”, 1/2 ”)
# 2: 1/8 “to 1/2” 13 Steps (1/8 “, 5/32″, 3/16 ”, 7/32 “, 1/4 ”, 9/32″, 5/16 “11/32″, 3/8 ‘, 13/32’, 7/16 ”, 15/32 “, 1/2 ”)
# 3: 1/4 “to 3/4 ” 9 Steps (1/4 ”, 5/16″, 3/8 “, 7/16”, 1/2 “, 9/16”, 5/8 “11/16”, 3/4 “)
# 4: 1/4 “to 1-3 / 8” ’10 Steps (1/4′ ‘, 3/8 “, 1/2”, 5/8 “, 3/4”, 7/8 “, 1 “, 1-1 / 8” 1-1 / 4 “, 1-3 / 8”)
# 5: 3/16 “to 7/8″ 12 Steps (1/4 ”, 5/16 “, 3/8”, 7/16 “, 1/2”, 9/16 “, 5/8” , 11/16 “, 3/4”, 13/16 “, 7/8”)
-
Carbide Bur Set Precision
Carbide Bur Set Double Cut, Shank Size (In.) 1/4
Number of Pieces:10
Tungsten Carbide
Includes SA-5,SB-5 SC-5 SD-5 SE-5 SG-5 SF-5 SM-5 SL-3 SH-5
INDIVIDUAL SIZES AVAILABLE -
SOLID CARBIDE SLOT DRILLS AND ENDMILL CUTTERS
Premium solid carbide end mills bring unmatched cutting performance, long tool life and high process security
WE OFFER THE FOLLOWING TYPES OF CUTTER.
• Two flute slot drills: made to close diameter tolerance for milling of keyways, slots and pockets
• Four-flute / multi-flute end mills: used primarily for profiling operations with low-medium metal removal rates, offering superior surface finish quality
• Ball nosed cutters: for profile milling and contouring of complex surfaces
• Roughing end mills: for high metal removal applications -
Q-Max Sheet Metal Punches
For punching burr- free and accurate holes in sheet metal. Up to 1.625mm thick mild steel,
2mm thick copper, brass and aluminium.These punches use a hexagon headed bolt and it is recommended to use a socket set and ratchet.
Size:- 10mm – 80mm/ 1/2″ – 3″
-
T.C.T Annular Hole Cutters
HC TYPE TUNGSTEN CARBIDE TIP CUTTER
Universal Shank applicable in any brands magnetic drilling machine
-
Magnetic Annular Hole Cutter
Supercut Rotabor
HSS Annular Hole cutter
ADVANTAGES
·· Manufactured from M42 High Speed Steel for increased tool life
·· Specifically designed to stay cool throughout the cut
·· With super fast feed rates and smooth holes in hard
materials
APPLICABLE MACHINE
·· All kinds of Magnetic drill machine. -
Carbide Tipped Hole Saw
Hi Cut HG TYPE
Tungsten Carbide Tipped Hole SawSuitable for Metal sheets, Cast iron, Stainless Steel, I Beams, L Angle.
Applicable Machines:
Portable drilling machines
Pillar Drilling machines etc.
